MIL-P-85315 Pump, Ejector, Air Vehicle Fuel, General Specification ForThis specification defines minimum requirements for air vehicle fuel ejector pumps, regardless of application \(transfer, boost, scavenge, etc.\), configuration \(multiple nozzle, multiple stage,variable geometry, etc.\), or auxiliary features \(check valves, motive flow shut off valves, negative "G" provisions, etc.\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

MIL-P-85315

4.6.12 Vibration - Vibration tests shall be conducted in accordance with the

model specification.

4.6.13

Strength. The ejector pump shall be subjected to mechanical shock per

paragraph 4.5.15.1 and mechanical load test per paragraph 4.5.15.2 of MIL-F-8615.

Disassembly and inspection. There shall be no evidence of deteriora-

4.6.14

tion or corrosion that might affect performance of the ejector when disassembled

and inspected at the conclusion of the tests, specified in section 4.

5.0 PREPARATION FOR DELIVERY

5.1 Preservation and Interior Packaging

5.1.1 Level A - Ejectors shall be Preserved and packaged one each in accordance

with Method II of MIL-P-116.

5.1.2 Level B - Ejectors shall be preserved and packaged in accordance with

Method 1A of MIL-P-116.

5.1.3 Level C - Ejectors shall be preserved and packaged in accordance with the

manufacturer's commercial practice.

5.2 Packing

5.2.1 Level A - Packing For Overseas Shipments - Units preserved and packaged

as specified in 5.1.1 or 5.1.2 shall be packed in overseas type exterior contain-

ers conforming to PPP-B-591, PPP-B-621, PPP-B-636, PPP-B-601, or PPP-B-621.

Exterior containers shall be of uniform size and shape and shall be of minimum

Containers shall be

cube and tare, consistent with the protection required.

closed and strapped in accordance with the applicable specification or appendix

thereto.

Level B - Limited Packing (For Domestic Shipment) - Units preserved and

5.2.2

packaged as specified in 5.1.1 or 5.1.2 shall be packed in domestic-type exter-

Exterior

ior containers conforming to PPP-B-591, PPP-B-601, or PPP-B-621.

containers shall be of uniform size and shape and shall be of minimum cube and

tare, consistent with the protection required. Containers shall be closed and

strapped in accordance with the applicable specification or appendix thereto.

5.2.3 Level C - Minimum Packing (For Domestic Shipment with Immediate

Use at Initial Destination - Packages which require over-packing for acceptance

by the carrier, shall be packed in exterior type shipping containers in a manner

that will insure safe transportation at the lowest rate to the point of deli-

very.

Containers shall conform to the Uniform Freight Classification Rules or

regulations of the other common carriers as applicable to the mode of transporta-

tion.

5.3 Marking of Shipments - In addition to any special marking required by the

contract or order, interior packages and exterior shipping containers shall be

marked in accordance with MIL-STD-129.